CB Tooling Detail

Nomimnal Hole Size1 15/64
Mandrel Tool Code38-3-N
Start Hole Max1.19
Start Hole Min1.18
Final Hole Max1.25
Final Hole Min1.23
Start Drill1WCI-SD-38-3-N
Start Reamer2WCI-SR-38-3-N
Combination GageWCI-CBG-38-3-N
Mandrel Wear GageWCIS-WG-38-3-N
Mandrel3WCI-CBM-38-3-N-*-XX
Extension Nosecap4WCI-1900NE-38-3-XXF
Flush Nosecap5WCI-1900N-38X
Sleeve6CBS-38-3-N-XX *
Finish Reamer7WCI-FR-38-3-N-XXXX
Optional Tooling
Start Hole GageWCI-SHG-38-3-N
Final Hole Gage8WCI-FHG-****-XXXX

« Return to overview.

1 - Start Drill
Add -C if cobalt
2 - Start Reamer
Add -C if cobalt
3 - Mandrel
* = Attachment callout
  • 1 = 7/16-20 used with 1700 puller to 16-3-N
  • 2 = 5/8-18 used with 1800 puller, 10-3-N - 30-3-N
  • 3 = .960 tang used with 1900 puller 32-0-N - 56-3-N
  • 4 = 7/8-14 used with 1900 puller, 32-0-N - 56-3-N, 2 piece
  • 5 = 7/8-14 used with 1800 puller
  • XX = Mandrel length in 1/10". Available in ½" increments
  • Add -V2 for high strength steel and titanium application
4 - Extension Nosecap
  • XX = Extension length in 1/10". Available in ½" increments
  • ****= (Overlap between 1700 and 1800 pullers. Please specify)
5 Flush Nosecap —
X = (F)lared or (S)traight sleeve
**** = (overlap between 1700 and 1800 pullers. Please specify)
6 Sleeve —
XX = Sleeve length in 1/16"
* = (F)lared or (S)traight sleeve
7 Finish Feamer —
XXXX = Final hole size in 1/10,000". Add -C if Cobalt
8 Final Hole Gage —
**** = Go diameter
XXXX = No-Go diameter