CB | Aircraft Wing Repair Application and Parts List
CB - Tooling 6
-
-
CB Tooling Detail
Nomimnal Hole Size | 3/16 |
Mandrel Tool Code | 6-0-N |
Start Hole Max | 0.18 |
Start Hole Min | 0.177 |
Final Hole Max | 0.1994 |
Final Hole Min | 0.1865 |
Start Drill1 | WCI-SD-6-0-N |
Start Reamer2 | WCI-SR-6-0-N |
Combination Gage | WCI-CBG-6-0-N |
Mandrel Wear Gage | WCIS-WG-6-0-N |
Mandrel3 | WCI-CBM-6-0-N-1-XX |
Extension Nosecap4 | WCI-1700NE-0601-XXF |
Flush Nosecap5 | WCI-1700N-06F |
Sleeve6 | CBS-6-0-N-XX * |
Finish Reamer7 | WCI-FR-6-0-N-XXXX |
Optional Tooling |
---|
Start Hole Gage | WCI-SHG-6-0-N |
Final Hole Gage8 | WCI-FHG-****-XXXX |
« Return to overview.
- 1 - Start Drill
- Add -C if cobalt
- 2 - Start Reamer
- Add -C if cobalt
- 3 - Mandrel
- * = Attachment callout
- 1 = 7/16-20 used with 1700 puller to 16-3-N
- 2 = 5/8-18 used with 1800 puller, 10-3-N - 30-3-N
- 3 = .960 tang used with 1900 puller 32-0-N - 56-3-N
- 4 = 7/8-14 used with 1900 puller, 32-0-N - 56-3-N, 2 piece
- 5 = 7/8-14 used with 1800 puller
- XX = Mandrel length in 1/10". Available in ½" increments
- Add -V2 for high strength steel and titanium application
- 4 - Extension Nosecap
- XX = Extension length in 1/10". Available in ½" increments
- ****= (Overlap between 1700 and 1800 pullers. Please specify)
- 5 Flush Nosecap
- X = (F)lared or (S)traight sleeve
**** = (overlap between 1700 and 1800 pullers. Please
specify)
- 6 Sleeve
- XX = Sleeve length in 1/16"
* = (F)lared or (S)traight sleeve
- 7 Finish Feamer
- XXXX = Final hole size in 1/10,000". Add -C if Cobalt
- 8 Final Hole Gage
- **** = Go diameter
XXXX = No-Go diameter