Specifically designed for special repair sleeve coldworking processes and applications
Special repair applications — The CR series was originally developed for rework applications, but can also be used for new fastener holes ranging from 3/16" to 13/32" (4.8—10.3). When coldworking a previously countersunk hole, the hole should be processed using the next larger tool size. See Section VII for tooling tables. Applied expansion is higher than CB tooling, which allows the use of fewer tool sets to coldwork a range of holes. A full set of CR tooling is available in kit form as the CWORK2B.
Scroll to find the proper final hole/start hole combination. Click on the link to view the proper tooling.
Nominal Hole Size | Mandrel Tool Code | Start Hole Min | Start Hole Max | Final Hole Min | Final Hole Max | |
3/16 | R30 | 0.171 | 0.173 | 0.1860 | 0.1890 | Get More Specs |
7/32 | R32 | 0.202 | 0.205 | 0.2150 | 0.2180 | Get More Specs |
1/4 | R40 | 0.232 | 0.236 | 0.2460 | 0.2490 | Get More Specs |
9/32 | R42 | 0.263 | 0.268 | 0.2770 | 0.2800 | Get More Specs |
5/16 | R50 | 0.293 | 0.299 | 0.3080 | 0.3110 | Get More Specs |
11/32 | R52 | 0.325 | 0.332 | 0.3400 | 0.3430 | Get More Specs |
3/8 | R60 | 0.355 | 0.363 | 0.3710 | 0.3740 | Get More Specs |
13/32 | R62 | 0.386 | 0.394 | 0.4020 | 0.4050 | Get More Specs |