| 1Start Drill Add -C if cobalt |
| 2Start Reamer Add -C if cobalt |
3Mandrel
- * = Attachment callout
1 = 7/16-20 used with 1700 puller to 16-3-N
2 = 5/8-18 used with 1800 puller, 10-3-N - 30-3-N
3 = .960 tang used with 1900 puller 32-0-N - 56-3-N
4 = 7/8-14 used with 1900 puller, 32-0-N - 56-3-N,
2 piece
5 = 7/8-14 used with 1800 puller
XX = Mandrel length in 1/10". Available in ½"
increments
Add -V2 for high strength steel and titanium application
|
- 4 Extension Nosecap
- XX = Extension length in 1/10". Available
in ½" increments
**** = (Overlap between 1700 and 1800 pullers. Please
specify)
|
- 5 Flush Nosecap
- X = (F)lared or (S)traight sleeve
**** = (overlap between 1700 and 1800 pullers. Please
specify)
|
- 6 Sleeve
- XX = Sleeve length in 1/16"
* = (F)lared or (S)traight sleeve
|
- 7 Finish Feamer
- XXXX = Final hole size in 1/10,000". Add -C
if Cobalt
|
- 8 Final Hole Gage
- **** = Go diameter
XXXX = No-Go diameter
|
