CW | Aircraft Wing Repair Application and Parts List

CW - Tooling - R9

CW-R Tooling Expanded Information

Nominal Hole Size 3/8
Mandrel Tool Code R3780
Start Hole Max 0.373
Start Hole Min 0.376
Final Hole Min 0.3780
Final Hole Max 0.3820
Start Drill 1 WCI-SD-R3780
Start Reamer 2 WCI-SR-R3780
Combination Gage WCI-CBG-R3780
Mandrel Wear Gage WCIS-WG-R3780
Mandrel3 WCI-CWM-R3780-1-XX
Extension Nosecap 4 WCI-1700NE-1201-XXF
Flush Nosecap 5 WCI-1700N-12F
Sleeve 6 CWS-R3780-XX *
Finish Reamer 7 WCI-FR-R3780-XXXX
Optional Tooling
Start Hole Gage WCI-SHG-R3780
Final Hole Gage 8 WCI-FHG-****-XXXX

« Return to overview.

1Start Drill Add -C if cobalt
2Start Reamer Add -C if cobalt
3Mandrel
* = Attachment callout
1 = 7/16-20 used with 1700 puller to 16-3-N
2
= 5/8-18 used with 1800 puller, 10-3-N - 30-3-N
3 = .960 tang used with 1900 puller 32-0-N - 56-3-N
4 = 7/8-14 used with 1900 puller, 32-0-N - 56-3-N, 2 piece
5 = 7/8-14 used with 1800 puller
XX = Mandrel length in 1/10". Available in ½" increments
Add -V2 for high strength steel and titanium application

4 Extension Nosecap
XX = Extension length in 1/10". Available in ½" increments
**** = (Overlap between 1700 and 1800 pullers. Please specify)
5 Flush Nosecap
X = (F)lared or (S)traight sleeve
**** = (overlap between 1700 and 1800 pullers. Please specify)
6 Sleeve
XX = Sleeve length in 1/16"
* = (F)lared or (S)traight sleeve
7 Finish Feamer
XXXX = Final hole size in 1/10,000". Add -C if Cobalt
8 Final Hole Gage
**** = Go diameter
XXXX = No-Go diameter